Search Selectors

Random Search Selector

Search Techniques SELEKTOR II is designed to be used at employee exit points, and will select at random members of the workforce to be searched.

Search Techniques SELEKTOR II will constantly provide the maximum deterrent effect to potential thieves without the cost and inconvenience of stopping everyone.

Search Techniques SELEKTOR II is robust, reliable, and totally unbiased, providing the cornerstone to an effective search policy eliminating claims of prejudice, victimisation or discrimination.
Search Techniques, manufacturers and suppliers of personnel security monitoring systems to the manufacturing, logistics, wholesale and retail industries. Random Search Selectors which impartially select employees in a truly random manner for security vetting, and Metal Detectors which facilitate fast no-contact checking of personnel, bags and packages etc. form part of the range.

Integrated into your company security policy, the SS4000 'SELEKTOR II' unit can provide both a permanent deterrent to thieves and a effective means of catching those that are not deterred, without undue imposition on your honest employees
Model SS4000 SELEKTOR II
   
The SELEKTOR II is a pre-programmable push button unit intended for installation at employee exit points.

 

Features:

  1. Can be desk or wall mounted, supplied ready to plug in and use.
  2. Key controlled settings of 0-100 per cent.
  3. Microcomputer system with four digit LED display.
  4. Random selection is guaranteed to be totally unpredictable.
  5. Built in search and pass counters.
  6. Input for external trigger signal (e.g. from Access Control Card Reader, Turnstile Rotation Contacts, IR Beam, etc.)
  7. Technical specifications:
    Power supply - Universal Power Adaptor (supplied), suitable for use with most UK, EURO and USA mains electric sockets.Supply Voltage 100 - 250v 50/60Hz AC.
    Weight 500g
    Dimensions H 23cm, W 10cm, D 6cm (overall)

How the SELEKTOR II works:-

  1. The SELEKTOR II is in view of the security personnel.
  2. All personnel push the press button on exit.
  3. A red light accompanied by high tone indicates search, whilst a green light with a low tone indicates a pass.
  4. The overall percentage of personnel to be selected can be adjusted from 0-100 per cent (in 1 per cent increments).
  5. The selection is random and the odds of being selected are the same every time the button is pressed.
  6. Personnel pressing the button are unaware of the SELEKTOR II settings, so even when set at 0 per cent it has a deterrent value.
  7. Pressing the buttons maintains awareness of your search policy.
  8. The search conducted should be as thorough as is necessary to determine that the person searched has no company property in their possession.
  9. The system can be enhanced by using CCTV to oversee and record the search procedures. The recordings will allow you to ensure that your search policy is adhered to at all times.
 

OPTIONAL ACCESSORIES

 

REMOTE PUSHBUTTON UNIT

The Remote Pushbutton Unit allows the SELEKTOR II to be installed at a location remote from the point of actuation.

It is connected to the SELEKTOR II via a plug in lead (supplied) and is suitable for installation in external applications.

Features:
High brightness LED Red and Green Lamps
Two tone piezo sounder
Two changeover relays for Search and Pass output, to activate turnstiles or electric locks etc.
Feedback input from automated turnstile or electric lock control to allow time for exit
Strong ABS sealed lid box
Industrial heavy duty pushbutton
Cable entry from the rear

Dimensions: H 16cm, W 8cm, D 9cm (overall)
Installation: supplied with screws & wall plugs for wall fixing.
Interconnection cable: 4.3m long (other lengths to order)

Search Techniques, manufacturers and suppliers of personnel security monitoring systems to the manufacturing, logistics, wholesale and retail industries. Random Search Selectors which impartially select employees in a truly random manner for security vetting, and Metal Detectors which facilitate fast no-contact checking of personnel, bags and packages etc. form part of the range.
Remote Pushbutton Unit
- Model SS4000PB
 

REMOTE INDICATOR UNIT

The Remote Indicator Unit allows remote monitoring of the SELEKTOR II's Pass or Search indication, or it can be used as the main indicator unit if using external trigger signals (e.g. from Card Readers, Turnstiles etc.) instead of the Push Button Switch on the SELEKTOR II.

It is connected to the SELEKTOR II via a plug in lead (supplied) and is suitable for installation in external applications.

Features:
High brightness LED Red and Green Lamps
Two tone piezo sounder
Two changeover relays for Search and Pass output, to activate turnstiles or electric locks etc.
Feedback input from automated turnstile or electric lock control to allow time for exit

Strong ABS sealed lid box
Cable entry from the rear

Dimensions: H 12cm, W 8cm, D 7cm (overall)
Installation: supplied with screws & wall plugs for wall fixing.
Interconnection cable: 4.3m long (other lengths to order)

Search Techniques, manufacturers and suppliers of personnel security monitoring systems to the manufacturing, logistics, wholesale and retail industries. Random Search Selectors which impartially select employees in a truly random manner for security vetting, and Metal Detectors which facilitate fast no-contact checking of personnel, bags and packages etc. form part of the range.
Remote Indicator Unit
- Model SS4000 REM IND
 

 

Download a leaflet:PDF document logo SS4000 SELEKTOR II LEAFLET.PDF (file size 54kb)

 

Get Adobe Reader logo
Copyright © 2000 - 2021 Search Techniques Ltd. All rights reserved.
All trade marks, registered trade marks, trade names and brands are the property of their respective owners. All trademarks acknowledged.
E & O E.
Top of page